Galley refit (again)

After 4 years of our temporary galley we are almost at clean sheet of paper time but with lots of learning.
The main worktop with sinks is going back in. But will be trimmed to a straight front edge. The support for the front edge will include a fiddle and be as deep as the sinks. At the outboard end it will go down to the hull for support and to be the side of the space for the gimbaled microwave and hob.
The outboard end of the worktop will have a lift out section to access corner storage.

We have made (the latest) "final" decision not to try to squeeze a very small fridge in. Instead we hope to include a larger one in the corridor to the aft cabin.