Electric
We are really excited with the progress on our stanchions and what we have learnt means we have redesigned our aft solar "arch" yet again (I've lost count, this might be the 10,000th version). Stanchions and Gates This was our first stanchion base. The carbon
Cooking
We have made lots of good progress on the galley this weekend. First Jane has painted the insulated hull plus the bulkhead. B&Q kitchen and bathroom paint (Whistler for the main areas and Monaco for the highlights). We then dry fitted the sink worktop. As we did so
Environmental
In Our Compost Toilet deadline we said we that our current plan is to create a place for composting the septage (the dry solids from our Nature's Head compost toilet). To achieve the temperatures to rapidly kill all pathogens three things are needed: * Insulation (in a large outdoor
Progress
A couple of weeks ago we wrote Insulating the galley, today we have improved the way we are holding the insulation in place. The vertical battens we tried last time didn't work well. The bend was too sharp. So now we have 120mm wide strips of 3.6mm
Progress
Rather than go to the boat last night we have been preparing some parts at home (and working out a bit better what we need at home and what at the boat). First task was ripping a 40mm square batten diagonally in half to create two triangular sections. This is
Progress
We have started to fit the insulation in the galley. 5mm self-adhesive foam with foil backing against the hull and deckhead. Will be covered by 40mm of xps foam board. The hope is that the 5mm stops condensation in any gaps between the xps board (which isn't very
Cooking
We seem to spend a lot of time moving stuff around the boat to get it out of the way for jobs or meals or sleeping. Then lots of time working things out and planning. Plus I had to buy a full sheet of marine plywood and very carefully bring
Progress
Well all our stuff (excluding tools) is on board for half term holiday. We haven't yet worked out where we can fit 🤣
Progress
We have a new shop where Jane is selling her beautifully crafted sewing projects as well note cards featuring her embroidered designs. The shop is at https://ko-f.com/sustainablesailing and is still in the early stages, lots more to come. As an incentive to join our regular supporters all
Cooking
This weekend we arrived determined to tackle the leaks in the port side deck that we found in the storms around the new year. We have holes from old deck cleats that we removed when fitting the chainplate backing plates. We hadn't got around to properly filling them.
Motor
Whoop whoop. Our electric motor is now in very close to the final position and ready for us to fit the brackets and motor mounts so that we can connect the drivetrain all the way to the propeller. That is still quite a lot of work and we do have
Cooking
Today we took the big step of drilling a hole through our new thrust bulkhead for the propeller shaft. Eventually, this hole will be significantly larger as the propeller shaft comes through it and ends inside the Aquadrive flexible coupling which gets bolted onto the forward side. At the moment